LANBERG Insertion tool for patch panels and keystone modules KRONE IDC 110 LSA NT-0001 DSP0000001195

Lanberg's insertion tool (also known as a
punch-down tool) for Krone IDC 110 connectors and
LSA connections is used to crimp / terminate network cables in accordance with the
LSA technology, used in practice to terminate
cables for flush-mounted and surface-mounted data installations.
boxes, TIC surface-mounted boxes, patch panels and many other
devices primarily intended for
telecommunications.

The device is ideal for LSA sockets used in xDSL and ISDN networks,
as well as for cables with LSA connectors and blocks of
telephone connectors.

Since a single cable cannot be left uninsulated, the
LSA insulation-stripping technique eliminates this particular problem, which
is reflected in the practical use of this product.

NT-0001 has a spring that ensures the cable cores are correctly clamped to the
cable contact, a hook for removing the cores, together with the element
to remove the plug connector and scissors for cutting excess cable
(equipped with a lock and impact force regulator): the depth
of cable pressure in the connector.

Using the Lanberg insertion tool (also known
as an LSA punch-down tool), proper cable preparation
will be much simpler, and the crimping process itself will reduce
the time significantly, compared with manual testing or
some other methods.

Product Specs:

- In accordance with the standards EIA / TIA 568 B.
- Allows connection of cables with a diameter of: 0,35 mm ~ 0,9 mm and 0,7
mm - 2,6 mm.
- White color.

Weight 54g
WHITE COLOR
Network tool type
Volume (m ³): 0.0009