Secure payment
Card, bank transfer and financing. SSL on every page.
Worldwide shipping
Stock available for shipping at competitive rates. Delivery times vary by region.
Personalized support
Call us at +34 948 088 505 or email us. We answer questions and help with your order.

D-LINK 20-port stackable managed gigabit switch SMARTPRO-L2+ 2XSFP 2XSFP+ DGS-1510-20

Regular price: €364.26 -€13.24
Price: €351.02
Tax included
Share
DeliveryOrder within the next — to receive it approximately Wednesday 25

Estimated delivery between Wednesday 25 and 04/12/2026

Ships from Tudela

Fechas estimadas para España peninsular; se ajustarán con tu código postal y forma de entrega.

IVA intracomunitario

La exención intracomunitaria puede aplicarse a una entrega a otro Estado miembro si el NIF-IVA es válido y el destino cumple los requisitos. La comprobación por sí sola no determina el tratamiento fiscal.

Cómo se comprueba el IVA
¿Eres profesional del sector?

Puedes solicitar una cuenta profesional e indicar los datos de tu actividad. La solicitud queda pendiente de revisión; puedes consultar su estado en tu cuenta.

Más información sobre cuentas profesionales
Canarias, Ceuta y Melilla sin IVA español

El tratamiento depende del destino de entrega y de la coherencia de la dirección. Pueden corresponder IGIC, IPSI, aranceles u otros cargos locales.

Más información sobre destinos e impuestos
general

Standards and Port Features

IEEE 802.3 10BASE-T Ethernet
IEEE 802.3h 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
802.3ae 10 GbE
IEEE 802.3x flow control for full-duplex mode
Auto-negotiation

Number of ports

DGS-1510-20 - 16 10/100/1000 Mbps, 2 Gigabit SFP, 2 10G SFP+

Network Cables

UTP Cat. 5, Cat. 5e (100 m max.)
EIA/TIA-568 100-ohm STP (100 m max.)

Full/half duplex

Full/half duplex for 10/100 Mbps and Gigabit speed

Media interface exchange

Auto or configurable MDI/MDIX

Performance

Switching capacity

DGS-1510-20 - 76 Gbps

Transmission method

Store and forward

MAC address table

16,000 entries per device

MAC address update

Up to 512 static MAC entries
Enable/disable auto-learning or MAC addresses

Maximum 64-byte packet forwarding rate

DGS-1510-20 - 56.54 Mpps

Packet buffer

DGS-1510-20 - 1.5 MB per device

PoE Standard

IEEE 802.3af, 802.3at

Physical and Environmental

AC input

Internal universal power supply, 100 to 240 VAC, 50/60 Hz

Maximum power consumption

DGS-1510-20 - 20.3 W

Standby power consumption

DGS-1510-20 - 12.2 W

Number of smart fans

DGS-1510-20 - 1

Acoustics

DGS-1510-20 - 43,8 dB(A)

Heat dissipation

DGS-1510-20 - 41.602 BTU/hour

Operating temperature

5 a 50 C (23 a 122 F)

Storage temperature

20 a 70C (-4 a 158 F)

Operating humidity

0% to 95% non-condensing

Storage humidity

0% to 95% non-condensing

DIMENSIONS

DGS-1510-20 - 280 x 180 x 44 mm (11 x 7,09 x 1,73 inches)

WEIGHT

DGS-1510-20 - 1,24 kg

Diagnostic LEDs

Power/stack ID/fan (per device)
Power/stack ID/fan error/PoE button (per
device) (only for DGS-1210-28P)
Link/Activity/Speed (per 10/100/1000 Mbps port)
Link/Activity/Speed/PoE mode (per 10/100/1000 Mbps port) (only for DGS-
1210-28P)
Link/Activity/Speed (per Gigabit SFP port)
Link/Activity/Speed (per SFP+ port of 10G)

Certifications

EC
FCC
C-Tick
VCCI
BSMI

SECURITY

CUL
CB

Software features

Stackability

Virtual stacking support
D-Link single IP management
Up to 32 devices per virtual stack
Stacking bandwidth of up to 20G
Physical stacking1
Supports duplex chain/ring topology
Up to 40G full-duplex stacking bandwidth
Up to 6 units per stack

L2 Features

MAC address table: Up to 16.384
Flow control
Flow control 802.3x
HOL blocking prevention
Jumbo frame up to 9,216 bytes
IGMP node description
IGMP v1/v2 nodes
IGMP v3 awareness
Supports 512 IGMP groups
Supports 128 static multicast addresses
IGMP per VLAN
Supports IGMP Snooping Querier
Host-based IGMP Snooping Fast Leave
MLD nodes
Supports MLD v1/v2 awareness
Supports 512 groups
Supports 128 static multicast addresses
MLD per VLAN nodes
Host-based MLD Fast Leave
MLD Snooping Querier
Spanning Tree Protocol
802.1D STP
RSTP 802.1w
MSTP 802.1s
Loopback detection v 4.07
802.3ad link aggregation
Max. 32 groups per device/8 ports per group
Port mirroring
Supports 4 mirroring groups
One-to-one, many-to-one
Supports mirroring for Tx/Rx/Both
Multicast filtering
Forwards all unregistered groups
Filters all unregistered groups
Ethernet Ring Protection Switching (ERPS)

VLAN

Tagged VLAN 802.1Q
GROUPS 4K VLAN
Configurable VID: 0~4094
GVRP
Asymmetric VLAN
Auto Voice VLAN
Auto surveillance VLAN 2.1
MAC-based VLAN
Protocol-based VLAN

Quality of Service (QoS)

Based on CoS
802.1p priority
VLAN
MAC address
EtherType
IP address
DSCP
Protocol type
TCP/UDP port number
DSCP or IPv6 traffic class
IPv6 flow label
802.1p Quality of Service
Queue management
Strict Priority Queue (SPQ)
Weighted Round Robin (WRR)
Deficit Round Robin (DRR)
SPQ + WRR
8 queues per port
Bandwidth control
Port-based (Ingress/Egress, minimum granularity for ports
10/100/1000 BASE-T is 64 Kb/s)
L3 Features

ARP
256 static RAT
Supports free RAT
IPv neighbor discovery 6 (ND)
16 IP interfaces
Default roadmap
Static routing
64 IPv4 static route entries
32 IPv6 static route entries
UDP helper

Access control list (ACL)

ACL based on
802.1p priority
VLAN
MAC address
EtherType
IP address
DSCP
Protocol type
TCP/UDP port number
IPv6 traffic class DSCP
IPv6 flow label
ACL Actions
Permit
Deny
Max. 256 access lists
Max. 768 rules
One or more ports (each rule)
Time-based ACL
ACL Statistics

SECURITY

Port security
Supports up to 128 MAC addresses per port
Broadcast/Multicast/Unicast Storm Control
Dynamic ARP Inspection
D-Link Protection Engine
DHCP Server Filtering
ARP Spoofing Prevention
Max. 64 entries
SSH
Supports v2
Supports IPv4/IPv6
BPDU Attack Protection
DoS Attack Prevention
SSL
Supports v1/v2/v3
Supports IPv4/IPv6
Traffic segmentation
IP-MAC-Port Binding
DHCP Snooping
IP Source Guard
Dynamic ARP Inspection
IPv Protection 6 DHCP
IPv6 RA Guard
IPv6 Snooping
IPv6 Source Guard
IPv Inspection 6 ND

AAA

Compound Authentication
802.1X port and MAC-based authentication
Supports RADIUS and Local Server
Supports EAP, OTP, TLS, TTLS, PEAP
Web-based Access Control (WAC)
Port-based access control
Host-based access control
Dynamic VLAN assignment
Guest VLAN
RADIUS and TACACS+ authentication for switch access
RADIUS and TACACS accounting
MAC-based Access Control (MAC)
Port-based access control
Host-based access control
Dynamic VLAN assignment
Japan Web-based Access Control (JWAC)
Port-based access control
Host-based access control
Dynamic VLAN assignment

OAM

Cable diagnostics
sFlow
Factory reset

Management

Command-line interface (CLI)
Telnet server
TFTP client
IPv6 neighbor discovery
Configurable MDI/MDIX
SNMP
Supports v1, v2c, v3
SNMP trap
System log
Max. 10,000 log entries
Debug command
Dual images
Surveillance mode
DHCP client
D-Link Network Assistant support
SNTP
ICMPv6
Dual IPv4/v6 stack
DHCP auto-configuration
RMON v1
LLDP, LLDP-MED
DHCP relay
Web-based graphical user interface
TFTP client
NTP
Telnet client (CLI only)

D-Link Green technology 3.0

Energy saving by:
Link status
LED or port shutdown
System hibernation mode
Time-based PoE (PoE models only)

Optional 10G SFP+ transceivers

DEM-431XT - 10GBASE-SR SFP+ transceiver (without DDM), 80 m : OM1 & OM2 MMF,
300 m : OM3 MMF
DEM-432XT - 10GBASE-LR SFP+ transceiver (without DDM), 10 km

Optional 1G SFP transceivers

DEM-310GT - 1000BASE-LX SFP transceiver, single-mode fiber, 10 km , 3,3 V
Operating voltage
DEM-311GT - 1000BASE-SX SFP transceiver, multi-mode fiber, 550 m , 3.3 V
Operating voltage
DEM-312GT2 - 1000BASE-SX SFP transceiver, multi-mode fiber, 2 km , 3.3 V
Tensión de funcionamiento

Optional 10G SFP+ direct attach cables

DEM-CB100S - 1 m 10G SFP+ to SFP+ direct attach cable
DEM-CB300S - 3 m SFP+ to SFP+ direct attach cable 10G

Optional redundant power supplies

DPS-700 - Redundant AC power supply for DGS-1510-52XMP
Volume (m ³): 0.0127
Brand
D-LINK
Reference
DGS-1510-20
EAN-13
790069399459
Weight
5 kg

Comments (0)

No customer reviews for the moment.
Loading...

Back to top