ARCTIC AIO liquid cooling for CPU LIQUID-FREEZER III PRO 280 A-RGB 100147618VAR

The ARCTIC Liquid Freezer III Pro is ready to use straight out of the box thanks to its pre-installed fans. The fan cables are concealed in the sleeve, so only one cable needs to be connected to the motherboard. To compensate for the lack of airflow from a tower cooler, the Liquid Freezer III Pro features a revised VRM fan. In cases of insufficient VRM cooling, poor airflow or particularly in overclocking scenarios, the PWM-controlled VRM fan enables almost silent cooling of the socket area. This allows for a continuously higher load and a longer service life for the voltage transformers. The Liquid Freezer III Pro is equipped with a specially designed PWM-controlled water pump, which has been further optimised in terms of performance and noise level. The radiator's P14 Pro A-RGB fans are quiet and powerful at low speeds, with more power reserves under load, for maximum cooling performance without compromise. With the splitter cable, the pump, VRM and radiator fans can be controlled separately or together via a single PWM signal using the all-in-one cable.
Part number: ACFRE00183A
Type: Liquid Cooling Kit
Socket : 1700, 1851, AM4, AM5
Fixation: screw-mounted
with temperature sensor: LED lighting
LED Lighting: Yes, Addressable RGB Signature
Standard RGB: AURA Sync, Mystic Light, RGB Fusion
Speed: 400 to 2,500 rpm
Material: Aluminum, Copper
Fan bearing: FDB - fluid dynamic bearing
Airflow: 186 m³/h (110 cfm)
Airflow: up to 5,2
Radiator size: 2x 140 mm
Pump - Connection: 4-pin
Closed system: Closed system
Power connector: 4 pins PWM
Voltage range: 12 volts
Dimensions (LxWxD) - Fan 1: Number: 2 unit(s), Width: 140 mm, Height: 140 mm, Depth: 27 mm
GPU heatsink weight - Total: 1.9 kg
Part number: ACFRE00187A