ARCTIC AIO liquid cooling for CPU LIQUID-FREEZER III PRO 240 100127510

The ARCTIC Liquid Freezer III Pro is ready to use straight out of the box thanks to its pre-installed fans. The fan cables are concealed in the sleeve, so only one cable needs to be connected to the motherboard. To compensate for the lack of airflow from a tower cooler, the Liquid Freezer III Pro uses a revised VRM fan. If VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios, the PWM-controlled VRM fan enables almost silent cooling of the socket area. This allows for consistently higher loads and a longer service life for the voltage transformers. The Liquid Freezer III Pro is equipped with a specially designed PWM-controlled water pump, further optimized for performance and noise levels. The P12 Pro A-RGB fans on the radiator are quiet and powerful at low speeds, with more power reserves under load, for maximum cooling performance without compromise. With the splitter cable, the pump, VRM and radiator fans can be controlled separately or together via a single PWM signal using the all-in-one cable.
Part number: ACFRE00178A
Type: Liquid Cooling Kit
Socket : 1700, 1851, AM4, AM5
Fixation: screw-mounted
Speed: 600 to 3,000 rpm
Material: Aluminum, Copper
Fan bearing: FDB - fluid dynamic bearing
Airflow: 131 m³/h (77 cfm)
Airflow: up to 6,9
Radiador size: 2x 120 mm
Pump - Connection: 4-pin
Closed system: Closed system
Power connector: 4 pins PWM
Voltage range: 12 volts
Dimensions (LxWxH) - Fan 1: Quantity: 2 unit(s), Width: 120 mm, Height: 120 mm, Depth: 25 mm
GPU heatsink weight - Total: 1.7 kg