ALPHACOOL Inline particle filter for liquid cooling ES BIG G1/4 29145 1799014

The Alphacool Enterprise Solutions series ES Big Inline 2x G1/4" IG 29145 particle filter is integrated into the cooling circuit and filters out any dirt particles that may be caused by contaminated coolant. Thanks to the Big Inline particle filter, damage to the pump and other components due to contamination is almost impossible. Depending on the available space, the ES Big Inline particle filter can be installed in any position in the computer case. The particle filter is equipped with two G1/2" connections (In/Out). The scope of delivery includes additional adapters that allow the filter to be easily converted to 2x G1/4" connections using a hex key. Due to the large surface area of the screen filter, the coolant flow rate inside the particle filter decreases, allowing suspended solids to slowly settle at the bottom. However, the reduced flow rate inside the filter has no adverse effect on the overall flow of the water circuit. The particle filter has a crystal-clear acrylic cylinder that holds suspended solids and provides visual monitoring of contamination levels. The cylinder's large volume and resulting capacity to absorb dirt particles significantly extend maintenance intervals. When installing the ES Inline particle filter, a ball valve can be placed before the IN connection and after the OUT connection. This makes it much easier to remove the particle filter for maintenance (cleaning).
Type: Filters
Filter type: Water filter
Measurements: Diameter: 41 mm
Properties: Washable
Quantity of filling: 1 pc.
Dimensions: Width: 69 mm x Height: 122 mm x Depth/length: 95 mm
Weight: 201 grams