I-TEC USB 3.0 charging hub with 16 ports and external power supply U3CHARGEHUB16 90W DSP0000018443

I-TEC USB 3.0 CHARGING HUB WITH 16 USB 3.0 PORTS AND 90W POWER ADAPTER

Our HUB gives you 16 USB 3.0 ports with Plug & Play functionality, and also offers standard charging via USB. The HUB is able to detect
automatically whether a peripheral is connected to be charged via USB. Thanks to its 16 USB 3.0 ports, the HUB makes it easy to charge up to 16 peripherals at the same time. The
The USB 3.0 interface is particularly important for transferring data from memory cards and USB 3.0 flash drives, allowing you to appreciate
its high transfer speed to the full. The external adapter included in the package ensures stable power supply through the USB ports, as well as the
performance of your new HUB Hub, which is up to 10 W per port. The HUB’s individual ports can be disconnected or connected using the corresponding switch. This way
you will reduce the HUB’s power consumption while increasing the charging power available at the ports that remain connected. The HUB does not require device driver installation.
All you need to do is connect it to your computer using the USB cable, and you can start using it straight away. The HUB has built-in overcurrent protection
to protect your computer in the event of a short circuit in a peripheral device. It is also, of course, backward compatible with USB
2.0 / 1.1. Your new HUB is automatically installed by the system and does not require any device drivers. Please connect the power adapter plug to your
HUB, then plug the adapter into a 230 V socket. Next, connect your HUB to an available USB port on your laptop or desktop computer (PC) using the USB cable (that is, a
standard USB 3.0, 2.0 or 1.1 port) and follow the instructions displayed on the screen. Your new
HUB will be installed and displayed in Device Manager as Generic USB Hub and Generic SuperSpeed USB Hub.
Volume (m ³): 0.0021