UBIQUITI Outdoor Wi-Fi bridge with integrated antenna NANOSTATION-LOCO M2 2,4GHZ 150MBPS LOCOM2

NanoStation Loco M2 is a compact outdoor device, includes an antenna
Dual-polarity MIMO for the 2.4 GHz band. The speed of
actual data transfer rate of the device is up to 150 Mbps.
Thanks to TDMA (Time Division Multiplexing) technology, it allows connections
to more than 300 clients to the device.
This model has low latency. Compared with its predecessors,
Nanostation M, the Nano Loco M2 has a processor with a higher clock speed
of 400 MHz and more memory.
Very simple and straightforward administration web interface
Examples of possible configurations:
*AP, client or WDS mode
*Traffic Shaping
*QoS
*Transparent bridge or routing between WAN and LAN, with or without NAT
*LED specifically to indicate signal strength

The device is compatible with IPv6 in bridge and WDS mode.
The device includes the 24V PoE injector required for its power supply.
Important compatibility information:
This device uses the new version of AirOS V firmware. For this reason,
the device may not be fully compatible with other
radio devices.
The AirOS system is continuously being improved, so it is recommended
to always keep the firmware updated to the latest version.
Specifications:
Operating mode
AP, Client, WDS
FREQUENCY
2400 - 2486 MHz
DHCP
YES
Transmission speed
up to 300 Mbps
STANDARD
802.11b/g/n
Chipset
Atheros
Max. output power
12dBm ( EU ) , 23dBm ( Other countries )
Max. output power ( EIRP )
20dBm ( EU ), 33dBm ( Other countries )
Sensitivity -96 dBm
Modulation
OFDM, DBPSK, DQPSK, CCK, 64QAM,16QAM
Encryption
WEP, WPA, WPA2
Certifications
FCC, CE
LAN port
1x RJ45 10/100 Mbps
Power supply
24 V, 0,5 A
Operating temperature
from -30C to +80C
DIMENSIONS
163 x 31 x 80 mm
WEIGHT
0,18 kg
Interface
LAN, WiFi
Supported operating system
AirOS V
Gain
8 dBi
Polarization
Linear - horizontal and vertical
H-pol Beamwidth
60/60
V-pol Beamwidth
60/60
MIPS 24KC processor, 400 MHz
RAM
32 MB
NAND
8 MB
Volume (m ³): 0.0016